איך להחליף את הכבל הקצר Recoaters Short Cord

The recoater cord is a consumable part and has to be replaced after 200-300 printing hours.

You will need: a new recoater cord and a 2mm hex wrench

  • Turn the printer on and open the printer lid.
  • Turn the printer off and unplug the power cable.
  • Move the recoater arm by hand to the middle of the printing chamber.
  • Remove two black screws on the side (Lisa)/top (Lisa Pro) of the recoater arm.
  • Remove the black recoater cover.
  • Unscrew the recoater cord from both sides. Mind the position of the spring.
  • (Lisa) Unscrew the mounting plate off the cord.
  • Remove the cord.
  • Thread the new cord through the recoater arm. Mind the position of the spring.
  • (Lisa) Screw the mounting plate to the new cord.
  • Screw the recoater cord in place.
  • Reinstall the recoater cover.

 

If you have any difficulties contact Mafil support.